Itt tartozkodik: Hírek> Híreink> Silicone Materials For Transportation Electronics From Dow
DOWSIL TC-3065 Thermal Gel | New
DOWSIL TC-3065 is a one-part, 6.5W/mk thermal conductivity silicone gel. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pads for thermal transferring, stress relieving and shock damping. Room temperature curing, or accelerated curing at 60°C or higher temperature for shorter curing time.Features & BenefitsOne-part, gray, dispensable and curable thermal gel Re-workable after curing Room temperature curing or accelerated at 60°C or ...
DOWSIL TC-4040 Dispensable Thermal Pad | New
DOWSIL TC-4040 is a two-part, 1-to-1 mix ratio, blue color, thermally conductive dispensable thermal pad. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pad for thermal transferring, stress relieving and shock damping. It could also be used as gap filler with reworkable performance. Features & BenefitsLiquid and curable thermal gel to form a soft thermal pad to help gap filling, heat dissipating, stress relieving and shock ...
PANACOL Vitralit UD 8052 F | New
Vitralit® UD 8052 F is a one component, no flow, UV/visible light and humidity curing isocyanate acrylate adhesive. The base material is transparent and slightly yellow. Customized versions with various colors are possible and make process control easier. Vitralit® UD 8052 F is specially designed as a flexible encapsulant for local circuit board protection. Its jetting dispensability and fast cure properties make it especially suitable for applications in consumer electronics, where ...
PERMABOND 2K ET5364 | New
PERMABOND® ET5364 is a two-part, 1:1 mixable epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. Permabond ET5364 forms tough bonds with excellent shear strength. Features & Benefits Adhesion to a wide variety of substrates Easy to apply High shear strength Good impact strength Good chemical resistance Non-drip rheology Permabond is responding to customers’ ...
PERMABOND 2K MT382 | New
PERMABOND® MT382 is a two-part, modified epoxy adhesive designed for sealing/bonding and potting applications. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. The product can be cured in different mix ratios depending on the flexibility required in the final cured product. MT382 is self-levelling. Features & Benefits Adhesion to a wide variety of substrates Full cure at room ...
PERMABOND 2K MT3809 | New
PERMABOND® MT3809 is a 10:1, two-part, modified epoxy adhesive designed for potting applications. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics. When cured, this adhesive is soft and reasonably flexible. Its low viscosity makes it suitable for potting intricate parts. Features & Benefits Adhesion to a wide variety of substrates Full cure at room temperature Easy to apply Soft & flexible Self levelling Low ...
PERMABOND 2K MT3821 | New
PERMABOND® MT3821 is a 2:1, two-part, modified epoxy adhesive designed for sealing and bonding. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. When cured, this adhesive is soft and flexible. Features & Benefits Adhesion to a wide variety of substrates Full cure at room temperature Easy to apply Soft & flexible PERMABOND 2K MT3821
MOLYKOTE D-6900 | New
Description Heat-curing dry-film lubricant for metal gaskets.ApplicationsMetal gaskets with high-temperature-resistance property (e.g., exhaust manifold gaskets). Coating offers micro sealing property (fulfilling EURO 6 emission specifications up to 600°C) and prevents welding of metal/metal combinations at high temperatures. (NOTE: Temperatures above 600°C have not yet been tested.) Sliding contact of metal/metal combinations with slow to moderately fast movements and high ...
PANACOL Vitralit UD 1405 | Újdonság
Vitralit® UD 1405 is a UV / VIS and thermally curable epoxy resin that has very good wetting properties due to its low viscosity. Thicker layers can be quickly thermally hardened after UV curing. Vitralit® UD 1405 is temperature-resistant, has a high glass transition temperature and is electrically insulating. It is particularly suitable for fiber-reinforced windings of electrical composite components.Technical DataResin: epoxy Appearance: transparentViscosity [mPas]: 250 - ...
Silicone Materials For Transportation Electronics From Dow
Driving advances in electronics bonding, sealing and protectionEnergy efficiency is a driving force behind advances in Dow technologies for automotive electronics and assembly. From conventional to hybrid to electric, the cars of today and tomorrow rely on electronics to improve safety, reduce emissions, increase energy efficiency and enhance comfort.How can we contribute to lighter, longer-lasting batteries for electric vehicles? Increase the durability and touchscreen functionality of control ...
